Tag Archive

Open Nozzle System or Valve Gate?

Choosing the right injection technology for LSR molding is key to a successful part, especially in the case of directly gated components (no sprue).  The two most popular systems involve open nozzle systems and valve gates.

Two Shot Molding | Multi-Station Molds: Transfer Molds

For Two Shot Molding, a multi-shot mold is needed. There are several types of multi-shot molding available, such as over-molds, core-back, and multi-station molds. The right mold selection depends on part geometry, volume, quality, and molder capacity/capability.

Silicon Injection Moulding | Multi-Station Molds: Rotational Molds

In 2-Shot injection molding, a polymer is injected over a molded plastic insert to combine the best features of different materials while reducing or eliminating additional assembly operations. This reduction or elimination of post-processing steps is one of the biggest economical advantages of the 2-Shot silicone injection moulding process. For this kind of silicone injection moulding, a multi-shot mold is needed. There are several types of multi-shot silicone injection moulding available, such as over-molds, core-back, and multi-station molds. The right mold selection depends on part geometry, volume, quality, and molder capacity/capability.

Why Only Hollow LSR Parts Float on Water

The density, or its reciprocal, the specific volume, is a commonly used property for polymeric materials. Density is primarily used as a material control tool, as well as to compare the buoyancy of different materials, but it can also be used to calculate the mass of rubber required to produce a given volume of material. The density of compounds with fillers or different materials can be computed at any temperature using the rule of mixture. Density measurements are performed following the standard tests ISO 1183 and ASTM D792. The density of Liquid Silicone Rubber (LSR) is typically in the range of 1.10 – 1.50 g/cm3 (density of natural rubber: 0.92, EPDM: 0.86 g/cm3), so it will sink in water (density of water: 1 g/cm3).

Injection Molding Silicone | Polycarbonate – Amorphous Thermoplastic

Polycarbonate (PC), first introduced in 1958, is an amorphous engineering thermoplastic with exceptionally high impact strength, transparency, high temperature resistance, and dimensional stability. It has a high surface gloss and is available in many colors and color intensities. Additionally, it is impact resistant and maintains high strength and stiffness in a temperature range from -150 to +135˚C.